Josh-the-Locksmith
25 Years Experience
Austin, TX
Male, 46
I've been a locksmith since 1998. I did automotive residential & commercial work from 1998 to 2008. From 2008 to 2018, I did some residential, but mostly commercial work. I have been project managing & estimating since 2018. I used to locksmith in the Chicago area, now the Austin area.
It really depends on how old your lock is. I believe the new Dexter locks are designed different than the old ones. You're probably better off just getting a new deadbolt. Look for something that specifies "drive-in" latch, or "6-way" latch. Most don't come 1 specific way, they come with adapters so you can change it from square faced to a drive-in latch.
Share Answer: 
You could try a KW1, which is Kwikset.
Share Answer: 
Could've lots of things. Motorcycle, safe, tool box, hard to say. It's a widely used key.
Share Answer: 
Is this a Kwickset lock? If so, that is a fairly common problem. You probably just need to replace it. You shouldn't need to take off the front lever in order to remove it from the door. After you take the inside lever off, the trim plate covering the inside screws should either pop straight off by prying underneath a small cutout under the plate against the door, or twisting it counterclockwise a short turn, then it will pull off. All depend on brand & model. That would have been helpful.
Share Answer: 
Security / Bodyguard
Are you expected to take a bullet that's meant for someone you're guarding?
Meter Maid
Is it tough to have a job that consists exclusively of ruining peoples' days?
Fashion Model
What's the most lucrative type of gig models can book?
Definitely not.
Share Answer: 
99% of the time, no definitely not. The only time I would ever drill a lock before trying to pick it is if it is high security and I know there is no way I'm going to get that thing picked. If you had somebody come out to your house to unlock it, and you have regular residential locks, I am sorry for you. You hired someone very unprofessional.
Share Answer: 
I don’t do automotive work anymore, and it will probably greatly depend on your local market prices, but a locksmith should be able to do that for you, and use your existing key to cut the new key. I would roughly guess $75-100 to program the remote, & $50-100 to program and cut the key (if it has a chip in it). Be careful though, some locksmiths won’t cut and program 3rd party keys and remotes. So ask around before you buy.
Share Answer: 
-OR-
Login with Facebook (max 20 characters - letters, numbers, and underscores only. Note that your username is private, and you have the option to choose an alias when asking questions or hosting a Q&A.)
(A valid e-mail address is required. Your e-mail will not be shared with anyone.)
(min 5 characters)
By checking this box, you acknowledge that you have read and agree to Jobstr.com’s Terms and Privacy Policy.
-OR-
Register with Facebook(Don't worry: you'll be able to choose an alias when asking questions or hosting a Q&A.)
Browse Jobs
Host a Q&A
Search
Submit Your Question
Host a Q&A
Last 7
